 |
%20web.jpg) CT-V Series ITI-ExactTM CT-V Series Non-Lifting Vertical Indexing Tables are available in three frame sizes, each with faceplate diameters to accommodate a wide variety of applications.
The tables are rotated via a high-speed hydraulic rack and pinion drive with integral adjustable cushions. The positioning and hydraulic locking of the tabletop is via a rugged three-piece Hirth coupling, having 24 or 72 teeth as standard with options as listed, all with a standard accuracy of +/- 3 seconds of arc.
The indexing cycle is activated by the machine control and all functions are monitored via easy access feedback switches. | Model | CT-200V | CT-250V | CT-320V | | Table Diameter (mm) | Ø200 | Ø250 | Ø320 | | Table Center Hole Diameter (mm) | Ø30 H6 | Ø55 H6 | Ø65 H6 | | Table Center Hole depth (mm) | 35 | 12 | 20 | | Table Center Through Hole Diameter (mm) | Ø27 | Ø30 | Ø31 | | Table overall height (mm) | 285 | 362 | 395 | | Center Height of Vertical Position (mm) | 155 | 210 | 230 | | Table T-Slot Width (mm) | 12 H7 | 12H7 | 12 H7 | | Standard guide block Width (mm) | 12 h7 | 12 h7 | 14 h7 | | Hydraulic Pressure (kg/cm²) | 30 | 35 | 35 | | Index number (standard) (division) | 4, 6, 8, 12, 24 (one of them) | | Index number (available) (division) | 2, 3, 5, 9…available by special order | | Rotating direction | CW & CCW | | Indexing accuracy (accumulative) (sec) | ± 4” | ± 4” | ± 4” | | Repetitive accuracy (sec) | ± 2” | ± 2” | ± 2” | | Rotation torque (kg-m) | 25 | 37 | 60 | | Permissible instant inertia WR² (kg.m²) | 1.75 | 5 | 21.25 | | Indexing time of 90 degrees (s) | 1.7 | 2.0 | 2.3 | | Machining thrust vertical (clamp status) | F (kg ) (N) | 1260 12340 | 208 2041 | 1560 15200 | | Horizontal torque (clamp status) | F x L (kg-m) (N-m) | 108 1060 | 122 1200 | 332 3250 | | Tilting torque (Clamp status) | F x H (kg-m) (N-m) | 55 541 | 122 1200 | 145 1423 | | Load Capacity | Vertical (kg) | 95 | 130 | 200 | | Weight | Net (kg) | 50 | 85 | 98 |
* Indexing time 90 degrees (unclamp, rotate, clamp) value base on 35 kg/cm2, 30L/min regular hydraulic condition. |
Indexing Tables | Rotary Tables | Tandem Tables | Tail Stocks |  |
Please clink the link below for
Static and Driven
Tool Holders
 |
| UPCOMING EVENTS:
| |
|
Indexing Technologies Inc.
37 Orchard Street
Ramsey, N.J. 07446 (201) 934-6333 - Phone
(201) 934-6488 - Fax e-mail us here PLEASE NOTE:
All downloadable documents within this website require the Acrobat Reader plug-in. To download a free copy of the plug-in, go to the Adobe web site. 
|
%20no%20address.jpg)
