Manipulators

 

MAN

The MAN family of manipulators, features a single piece cam which combines both a globoidal and a flat cam. It turns a single uniform rotating input motion into an appropriate and ordered series of output movements, linear intermittent and rotating intermittent (indexing version) or oscillating intermittent (oscillating version) of the output shaft, and on which are installed gripper devices. The manipulators are characterised by: accuracy, speed and smoothness of the movements, low vibration, silent operation, simple construction, compactedness, oil-bath lubrication of internal components, easy installation and ample diversification of the output shaft movement cycles.
These features grant reliability and flexibility of use in applications that include machine loading-unloading, handling in assembly operations and transfer to conveyor belts.
They are available in five frame size: MAN10-20-30-40-50 with 45-65-85-110-165 (mm) max. linear stroke and angular rotation up to 180°.

• Download "MAN" Catalog here.

 

 

 

H.. S.

 

The ROTARY MANIPULATORS of the series H-S are double cam mechanisms which transform the uniform rotary motion of the input shaft into, respectively, intermittent rotary and linear motion typical of the pick and place cycle.

The standard Rotary Manipulator has an angular oscillation of up to 90° or an index of 180° together with a linear stroke,of up to 120 (mm). It is possible to use a load support arm up to 500 (mm) long, carry up to 10 (kg) at 40 cycles/min.

There are many other combinations of load/speed motion possibilities resulting from over 50 years of experience and know- how by the industry leaders, COLOMBO FILIPPETTI.

• Download "H..S." Catalog here.

 

 

 

 

H.. T.

 

LINEAR MANIPULATORS of the series H-T are flat conjugate double cam mechanisms that transform the uniform rotary motion into a two-way linear indexing motion typical of pick and place movements. They are manufactured in three different sizes H65T, H80T, H105T and in two special long traverse versions H80TL and H105TL.

With the standard LINEAR MANIPULATORS it is possible to perform traverses up to 480 (mm) in a longitudinal direction and up to 120 (mm) in a transverse direction, reach a velocity of 60 (cycles/min.) and transport pieces up to 30 (kg).

• Download "H..T." Catalog here.